vinyl ceiling stuff

Where in nam can i buy vinyl stuff off a roll to do the inside ceiling of my caravan with? i want a choice of different thickness,s and a choice of colours, Cheers!

Wilkinsons sell it

maybe dunelm , Tewkesbury road

dunelm defo do , not got a bad selection either also ther is a place next to the old spring bok on albion st supposed to have loads of fabrics etc in there
cheeep aswell so imtold

Cotswold fabric warehouse on tewkesbury road next to kwik fit do a fair choice

and i think the range down there , so there's 3 to try on the same road , the one in town had nun when i when in i don't think , loads of fabric cheap though

Cheers! will check em out

got this today, What glue do you use?? Cheers!

i would use spray carpet glue my self , the really smelly shit is stickest . but be carfull with i used nozzle as it will come out the wrong way

3M Super77

Cheers chaps! its gonna be a difficult job to do cuz roof curves both ways, Any tips? Wud it be possible to use strong wall paper paste? to give longer time for getting creases out etc. Cheers!

I think it mite be very hard to get on without creses , depends how much give is in the vynL . You could maybe think about doing it in strips with the edges showing sowed over an inch , the Rodgers every foot could be a feature like on the vynal roof on a car .

Ether way glue a 6 inch up the work along bit buy bit jolly good luck

Cheers Toast

negawskloV wrote:3M Super77

Where did you get this from mate? i couldn,t source any locally or online apart from in usa, Cheers!

Vinyl ?
Or Lino taze? If its Lino mate leave in the sun for half hour or pour boiling water over it will make it more flexi

And when you get to the corners or crease push the back of the Stanley knife in to it to follow the contour that will give you a nice line to cut
Like how you would fit a carpet although over head will be a lot harder

Vinyl ?
Or Lino taze? If its Lino mate leave in the sun for half hour or pour boiling water over it will make it more flexi

And when you get to the corners or crease push the back of the Stanley knife in to it to follow the contour that will give you a nice line to cut
Like how you would fit a carpet although over head will be a lot harder

Spray glue from B an Q

went yesterday but they didnt have any spray glue, im keen on that 3m Super 77 now my vinyl is quite thick and heavy, Cheers

Iv always got it from b& q or hombase . Not sure how you tell but some sticks . Some dont , the sMelly stuff won't let you down . It's sticks as fuck . You could try a carpet shop

Contact addesive would be good like Evo stick but you'd need to roller it to get rid of air bubbles

http://solutions.3m.com/wps/portal/3M/en_US/3M-Super-77/Super77/Resources/WhereToBuy/

Link from this site..http://solutions.3m.com/wps/portal/3M/en_US/3M-Super-77/Super77/SprayAdhesive/Product-Information/

I assume thats the stuff you want

I smothered my cab ceiling boards in spray glue and a year later its still come unstuck..
Get the strongest stuff you can get mate..
Wallpaper paste will last about 0.000002 seconds

DICKIE wrote:I smothered my cab ceiling boards in spray glue and a year later its still come unstuck..
Get the strongest stuff you can get mate..
Wallpaper paste will last about 0.000002 seconds

Weetabix then !

the braincell wrote:

DICKIE wrote:I smothered my cab ceiling boards in spray glue and a year later its still come unstuck..
Get the strongest stuff you can get mate..
Wallpaper paste will last about 0.000002 seconds

Weetabix then !

Or spunk..
you dont see babies falling apart

DICKIE wrote:

the braincell wrote:

DICKIE wrote:I smothered my cab ceiling boards in spray glue and a year later its still come unstuck..
Get the strongest stuff you can get mate..
Wallpaper paste will last about 0.000002 seconds

Weetabix then !

Or spunk..
you dont see babies falling apart

for some reason i feel ill after reading that...must be my mind workin over time