i want to make something like this for sod all ...

cheers for help al , no worrys if you cant get bits though , cheers for tryng

Toastie wrote:

alibabs wrote:If you can hang on till tue wed I'll get you enough to do this !!!

no hurry mate , well about 8 days till next bottling if i can find some bottles .


check this out






with a pump its pumps the cleaning fluid round and round then you change for water and it rinses round and round . ace

alibabs wrote:I've got an old wall paper stripper couldn't we connect that up to the 15mil pipe surely that would work ???

ye i think that is what he has done but he still has the wash them out so the washing bit is still a pain in the asr , with our way the washing bit will be easy ,

the steaming bit is for sterilizing without any sterilizing fluid , but the fluid aint expensive and i spect youd end up using as much in lecy as you would in sterilizing fluid and a lot more cockin about setting it up

I am a plumber mate will check my garage later. I prob have all of this in spare. Will let you know?!
The uprights will be 8/10mm micro bore I think I have 8 this would work best. The rest will be 15mm so you can connect hose.

Thanks every one

nearly there mate but a couple of t pieces short and a length of pipe however with buggjammin being a plumber hes prob got everything you need for free

Looks ace alli so some micro bore for the uprights is what you need ye ?
And some t's

Good work

Fdk ftw

Iv just been offered some 8mm so will grab it

Check with bugjammin but I'm sure if you reduce the uprights to micro bore won't that make more pressure coming out ??? Ye 2 ts short and some micro bore but to put micro bore on to the 15 mil ts I got you will need reducers !!

iv acquired this , about 5 foot , 8 mm , iv been thinking an the up rights need to be about 7 inch just encase threes not anuff pressure when its all split ,

instead of t bit then reducers could we/you drill 8mm holes in the 15mm and weld them in ?

sorry if im making it harder than it is , just thinking out load

I guess so might be fidley but can't see why not ?

I got all t's bends and 8mm etc. if you do drill holes you could try and solder it but becarefull you don't let to much solder fall in as it will reduce flow rate. Try to make all holes or tees even distance apart.
P.s sorry took so long been cruzin was to good of weather to miss but if you need anything let us no.?!

cheers chaps , so do i need reducers then for better job . what do you want for the bits ?

if allis happy to knock it up as he hae started that would be great , if your to bizzy just say , i dont want to take the piss (even though i clarly am already ) .

where are you mat ?

maybe if alli can do a list of what bits he needs you can tick off what you have and then i can try and find anything missing

big thanks for both you help , this is the best bit about a club to me , looking after each other

No worries I will pm you or ali my number if he wants to knock it up as he started no probs. you can have the bits for nada. Give me a list I will double check all.

I would use reducers to be safe. I think I am a couple of reducers short but can get these on Monday for nothing if this 100% the way you want to do it.

This is why I joined the club sure I will need help with sumut 1day. And you all give advice with bug which is cool.

bugjammin wrote:No worries I will pm you or ali my number if he wants to knock it up as he started no probs. you can have the bits for nada. Give me a list I will double check all.

I would use reducers to be safe. I think I am a couple of reducers short but can get these on Monday for nothing if this 100% the way you want to do it.

No way man I'm cool if you want to do it mat
They were just a few bits I had from a bathroom I fitted last year (I average bout 1 a year )And I haven't soldered anything as yet !!
I'm easy either way !!

I will do it no probs if poss will do it tomorrow but won't have all reducers till Monday so will give whoever a shout then when complete. Is this ok guys?!

either ways fine with me

Will let you no how's it goin tomorrow and sort out picking picking it up or delivering to you Monday.

Fdk ftw

nice one , no hurry though so dont put you self out to much , if your about i and i aint you could drop with at work chicky any time as i see him every day or so cheers for help , and cheers alli for you advice

fdk wins yet again

alibabs wrote:Fdk ftw

whs ^^^

Ok buddy will do. Now time for

ye to rite

It's made just need to solder in reducers and 8mm uprights tomorrow when I get them even got connection on end with valve straight to hose connector mate.
Would upload photo is there a quicker way straight from iPhone.

nice , no quick way from the phone mate , have you got photo bucket on you phone ? thats the easiest way but is still a bit of a pain